<enigma2>
<crashdate>Wed May 22 07:47:41 2013</crashdate>
<compiledate>Feb 14 2013</compiledate>
<contacte....>somebody who cares</contacte....>
<!-- Please e.... this crashlog to above address -->
<skin>hd_glass16/skin.xml</skin>
<sourcedate>2013-02-14</sourcedate>
<branch>master</branch>
<rev>76fa1e7</rev>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>spark</stbmodel>
<kernelversion>
<![CDATA[
Linux spark 2.6.32.59_stm24_0211 #1 PREEMPT Tue Feb 12 02:36:35 EET 2013 sh4 GNU/Linux
]]>
</kernelversion>
<kernelcmdline>console=ttyAS0,115200 root=/dev/mtdblock6 rw rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m-0x40000000,4m-0x40400000 printk=1 stmmaceth=ethaddr:24:00:0A:00:37:FF</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
version=OpenAR-P_14-02-13-20:30:31_git-d5a168e
----------------------------------------------------------
----------------------------------------------------------
--enable-maintainer-mode
--enable-ccache
--enable-spark
--enable-stm24
--enable-p0211
--enable-player191
--enable-multicom324
--enable-py27
--enable-eplayer3
--enable-e2pd7
]]>
</imageversion>
<imageissue>
<!-- No such file or directory -->
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
right
unknown action SetupActions/right! typo in keymap?
action -> SetupActions right
tuning to transponder with data (11265, 30000, 0, 9, 2, 50, 1, 1, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 0 SR 30000000 INV 2 FEC 9 orbpos 50 system 1 modulation 1 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
action -> SetupActions left
unknown action SetupActions/left! typo in keymap?
action -> SetupActions left
tuning to transponder with data (11265, 30000, 0, 6, 2, 50, 1, 1, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 0 SR 30000000 INV 2 FEC 6 orbpos 50 system 1 modulation 1 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
action -> SetupActions left
unknown action SetupActions/left! typo in keymap?
action -> SetupActions left
tuning to transponder with data (11265, 30000, 0, 5, 2, 50, 1, 1, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 0 SR 30000000 INV 2 FEC 5 orbpos 50 system 1 modulation 1 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
action -> SetupActions left
unknown action SetupActions/left! typo in keymap?
action -> SetupActions left
tuning to transponder with data (11265, 30000, 0, 4, 2, 50, 1, 1, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 0 SR 30000000 INV 2 FEC 4 orbpos 50 system 1 modulation 1 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
action -> SetupActions left
unknown action SetupActions/left! typo in keymap?
action -> SetupActions left
tuning to transponder with data (11265, 30000, 0, 8, 2, 50, 1, 1, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 0 SR 30000000 INV 2 FEC 8 orbpos 50 system 1 modulation 1 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
action -> SetupActions left
unknown action SetupActions/left! typo in keymap?
action -> SetupActions left
tuning to transponder with data (11265, 30000, 0, 7, 2, 50, 1, 1, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 0 SR 30000000 INV 2 FEC 7 orbpos 50 system 1 modulation 1 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
action -> SetupActions left
unknown action SetupActions/left! typo in keymap?
action -> SetupActions left
tuning to transponder with data (11265, 30000, 0, 3, 2, 50, 1, 1, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 0 SR 30000000 INV 2 FEC 3 orbpos 50 system 1 modulation 1 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
action -> SetupActions right
unknown action SetupActions/right! typo in keymap?
action -> SetupActions right
tuning to transponder with data (11265, 30000, 1, 3, 2, 50, 1, 1, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 1 SR 30000000 INV 2 FEC 3 orbpos 50 system 1 modulation 1 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
set sequence pos 3
[SEC] setVoltage 1
action -> SetupActions right
unknown action SetupActions/right! typo in keymap?
action -> SetupActions right
tuning to transponder with data (11265, 30000, 2, 3, 2, 50, 1, 1, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 2 SR 30000000 INV 2 FEC 3 orbpos 50 system 1 modulation 1 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
[SEC] setVoltage 2
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
action -> SetupActions right
unknown action SetupActions/right! typo in keymap?
action -> SetupActions right
tuning to transponder with data (11265, 30000, 3, 3, 2, 50, 1, 1, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 3 SR 30000000 INV 2 FEC 3 orbpos 50 system 1 modulation 1 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f0(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
OURSTATE: failed, fatal
action -> SetupActions right
unknown action SetupActions/right! typo in keymap?
action -> SetupActions right
tuning to transponder with data (11265, 30000, 3, 3, 2, 50, 1, 2, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 3 SR 30000000 INV 2 FEC 3 orbpos 50 system 1 modulation 2 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
OURSTATE: tuning
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
action -> SetupActions left
unknown action SetupActions/left! typo in keymap?
action -> SetupActions left
tuning to transponder with data (11265, 30000, 2, 3, 2, 50, 1, 2, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 2 SR 30000000 INV 2 FEC 3 orbpos 50 system 1 modulation 2 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
set sequence pos 3
[SEC] setVoltage 2
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f2(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
action -> SetupActions left
unknown action SetupActions/left! typo in keymap?
action -> SetupActions left
tuning to transponder with data (11265, 30000, 1, 3, 2, 50, 1, 2, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 1 SR 30000000 INV 2 FEC 3 orbpos 50 system 1 modulation 2 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f0(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
action -> SetupActions left
unknown action SetupActions/left! typo in keymap?
action -> SetupActions left
tuning to transponder with data (11265, 30000, 0, 3, 2, 50, 1, 2, 0, 2, 0)
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11265000 Pol 0 SR 30000000 INV 2 FEC 3 orbpos 50 system 1 modulation 2 pilot 2, rolloff 0, is_id 0
tuning to 1515 mhz
set sequence pos 3
[SEC] setVoltage 2
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f2(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
OURSTATE: failed, fatal
action -> SetupActions cancel
[SKIN] Parsing embedded skin <embedded-in-'SimpleSummary'>
action -> MsgBoxActions ok
playing 1:0:1:1B4E:11:55:310000:0:0:0:
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0011:0055
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12284000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 49 system 0 modulation 1 pilot 2, rolloff 0, is_id -1
tuning to 1684 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1B4E:11:55:310000:0:0:0:
allocate demux
set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
use cached_channel
use cached_channel
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f1(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1e96840 running
[eEPGCache] channel 0x1e96840 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (1b4f), and 1 audio stream(s) (1b50), and the pcr pid is 1b4f, and the text pid is 1b54
allocate demux
decoder state: play, vpid=6991, apid=6992
DMX_SET_PES_FILTER(0x1b4f) - pcr - ok
DMX_SET_PES_FILTER(0x1b50) - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x1b4f) - video - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x1b54) - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
[eDVBCAService] new service 1:0:1:1B4E:11:55:310000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:1B4E:11:55:310000:0:0:0:
[eDVBLocalTimerHandler] diff is -1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 07:47:07
[eDVBLocalTimerHandler] m_time_difference is -1
[eDVBLocalTimerHandler] set Linux Time
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
PATready
use pmtpid 1b4e for service_id 1b4e
[EPGC] start caching events(1369198027)
eventNewProgramInfo 0 0
have 1 video stream(s) (1b4f), and 1 audio stream(s) (1b50), and the pcr pid is 1b4f, and the text pid is 1b54
decoder state: play, vpid=6991, apid=6992
not pauseable.
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[ePNG] failed to get png header
ePixmap::setPixmapFromFile: loadPNG failed
[ePNG] failed to get png header
ePixmap::setPixmapFromFile: loadPNG failed
[ePNG] couldn't open /media/hdd/piconCam/Wicardd-fs8.png
ePixmap::setPixmapFromFile: loadPNG failed
[ePNG] failed to get png header
ePixmap::setPixmapFromFile: loadPNG failed
[ePNG] failed to get png header
ePixmap::setPixmapFromFile: loadPNG failed
[ePNG] couldn't open /media/hdd/piconCam/Wicardd-fs8.png
ePixmap::setPixmapFromFile: loadPNG failed
[ePNG] couldn't open /media/hdd/piconCam/Wicardd-fs8.png
ePixmap::setPixmapFromFile: loadPNG failed
[ePNG] couldn't open /media/hdd/piconCam/Wicardd-fs8.png
ePixmap::setPixmapFromFile: loadPNG failed
[ePNG] failed to get png header
ePixmap::setPixmapFromFile: loadPNG failed
[ePNG] couldn't open /media/hdd/piconCam/Wicardd-fs8.png
ePixmap::setPixmapFromFile: loadPNG failed
[ePNG] failed to get png header
ePixmap::setPixmapFromFile: loadPNG failed
[ePNG] failed to get png header
ePixmap::setPixmapFromFile: loadPNG failed
[EPGC] abort non avail nownext reading
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[ePNG] failed to get png header
ePixmap::setPixmapFromFile: loadPNG failed
[ePNG] couldn't open /media/hdd/piconCam/Wicardd-fs8.png
ePixmap::setPixmapFromFile: loadPNG failed
action -> OkCancelActions ok
okbuttonClick
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:1B4E:11:55:310000:0:0:0:
[eDVBCAService] free service 1:0:1:1B4E:11:55:310000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
[eDVBLocalTimerHandler] remove channel 0x1e96840
[eEPGCache] remove channel 0x1e96840
[SKIN] Parsing embedded skin <embedded-in-'ManualScan'>
[SKIN] Parsing embedded skin <embedded-in-'SimpleSummary'>
[DVBCAHandler] no more services
action -> SetupActions ok
Add Sat: frequ: 12284 symbol: 27500 pol: 1 fec: 3 inversion: 2 modulation: 1 system: 0 rolloff0 pilot2
orbpos: 49
ServiceScanCreateSummary
[SKIN] Parsing embedded skin <embedded-in-'ServiceScanSummary'>
allocate demux
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12284000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 49 system 0 modulation 1 pilot 2, rolloff 0, is_id 0
tuning to 1684 mhz
OURSTATE: tuning
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[SEC] sleep 500ms
got pat
got pmt -2
got sdt 0
SDT:
ONID: 0055
SID 1af4: name 'TEST-M', provider_name ''
SID 1b03: name 'NADIYA', provider_name 'NADIYA'
SID 1b08: name 'SONCE (UA)', provider_name 'SOLAR MEDIA'
SID 1b0d: name 'Pravo-TV', provider_name 'TRK Pravo TV'
SID 1b12: name 'Channel 5 (Ukraine)', provider_name 'Channel 5 Ukraine'
SID 1b1c: name 'KRT', provider_name 'TRK Astra'
SID 1b26: name 'ATR', provider_name 'Atlant SV'
SID 1b30: name 'Pro BCE', provider_name 'ProBCE'
SID 1b3a: name 'LALE', provider_name ''
SID 1b44: name 'MAXXI TV', provider_name 'Maxxi TV'
SID 1b4e: name 'INTER +', provider_name 'INTER +'
got pmt -1
channel done!
FE_GET_PROPERTY failed (Invalid argument)
no channels left to scan.
1 channels scanned, 0 were unavailable.
1 channels in database.
Renumbering...
---- saving lame channel db
saved 122 channels and 1843 services!
scan done!
action -> OkCancelActions ok
ok
[SKIN] Parsing embedded skin <embedded-in-'SimpleSummary'>
action -> MsgBoxActions ok
tuning to transponder with data (12284, 27500, 1, 3, 2, 49, 0, 1, 0, 2)
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 192, in processDelay
callback(*retval)
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ManualScan/plugin.py", line 656, in restartManualScan
self.retune(None)
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ManualScan/plugin.py", line 251, in retune
self.tune(self.tpslist[self.tpslist_idx])
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/ManualScan/plugin.py", line 169, in tune
self.tuner.tune(transponder)
File "/usr/lib/enigma2/python/Components/TuneTest.py", line 24, in tune
parm.is_id = transponder[10]
IndexError: tuple index out of range
(PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0x1d515ec>>,()) failed)
getResolvedKey config....ugins.crashlogautosubmit.sendAn onCrashlog failed !! (Typo??)
getResolvedKey config....ugins.crashlogautosubmit.addNet work failed !! (Typo??)
getResolvedKey config....ugins.crashlogautosubmit.addWla n failed !! (Typo??)
]]>